• June 23. 2021

What are tactile switches good for ? Tactile switches are a type of switch that focus on producing a tactile bump and a relatively quiet audible click with each keystroke. Tactile switches offer great feedback when typing, so you know by the sound and feel everything is working properly and all of your keystrokes are getting logged. Here will focus on the ap...

• April 06. 2021

The micro switch was born in the 1930s. Since its birth, it has continuously developed and innovated to meet the needs of different applications. Due to its small spacing and large torque, micro switches are used in household appliances, medical equipment, aerospace, etc. It is usually used to detect temperature, position and liquid level. There are usually three specifications: basic type, type w...

• April 06. 2021

The waterproof tact switch is a switch that will not fail even if it is immersed in water, that is to say, the waterproof tact switch can completely protect the dust in the air. Different waterproof tact switches have different waterproof grades. Of course, they must have good waterproof performance. The higher the grade, the better the waterproof performance. The company can choose different grad...

• March 22. 2021

What is a DIP Switch ? A DIP switch is a manual electric switch that is packaged with others in a group in a standard dual in-line package. The term may refer to each individual switch, or to the unit as a whole. DIP switch type: direct plug-in, patch type, angle type, side dial key type. Dip switch working principle Each key of the DIP switch has two pins on the top and bottom of the back. Turn i...

• March 05. 2021

Common problems in the use of 6*6 smd tact switches The 6*6 smd tact switch is a hot-selling switch in the industry, and it is also the core tact switch of Gangyuan Electronics. It is also widely used in various products. If used improperly, there will be some defects, which are explained in detail below: The resistance value is too high: Generally, the resistance value of our tact switches are be...

• February 26. 2021

SMD silent tact switches are different from ordinary household switches. The micro tact switch is an electronic component. The country that invented the tact switch earlier was Japan. In Japan, the SMD silent tact switch is also called a sensitive switch. Its working principle is to close and connect circuits through different operating forces and directions. We can illustrate its advantages from ...

• April 06. 2021

Introduction Slide switch is to momentary switch the circuit by turning the switch handle to make the circuit on or off. The commonly used varieties of slide switches include single-pole double-position, single-pole three-position, double-pole double-position and double-pole three-position, etc. They are generally used in low-voltage circuits. They have the characteristics of flexible slider actio...

• February 26. 2021

About the micro switch As its name, the micro switch uses a very small force switch. It is a kind of switch in which external mechanical force acts on the movable reed through the transmission element, so that the fixed contact and the movable contact at the end are quickly connected or disconnected. Working principle The external mechanical force acts on the reed through the transmission element ...

• December 10. 2020

What is a rocker switch used for ? Rocker Switches house a button for operation that can be pressed on either end like a see saw to connect or disconnect an electrical circuit. They are often used as ON/OFF switches on the main power supplies for electronic devices. The internal structure diagram of the rocker switch will help you visualize how the rocker switch works so that you know how to conne...

• February 26. 2021

Tactile Switch Definition Tactile switches are switches that are used every day but are almost never seen, hidden under each button of the device. Although it is small and thin, it has high reliability and can ensure operation for years or even decades. A button switch is a small electromechanical device designed to be mounted on a printed circuit board (PCB). A push button helps in closing an ope...